UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor ssvoysky
Visitor
9,338 Views
Registered: ‎07-06-2012

What ISE software versions support Virtex 5 RAD hard (SIRF) FPGA?

Would anyone please share some Virtex-5 SURF wisdom.

What ISE versions support the RAD hard (SIRF) FPGA?

-thanks, serge

0 Kudos
6 Replies
Xilinx Employee
Xilinx Employee
9,320 Views
Registered: ‎07-23-2012

Re: What ISE software versions support Virtex 5 RAD hard (SIRF) FPGA?

TO work with SIRF FPGA, you need to have SIRF overlay installed in the ISE directory.

The SIRF overlay is available from ISE 12.1.

You need to contact your Xilinx Field Application Engineer (XFAE) to get the license/nstallation files for the same.

Regards,
Krishna
-----------------------------------------------------------------------------------------------
Please mark the post as "Accept as solution" if the information provided answers your query/resolves your issue.

Give Kudos to a post which you think is helpful.
0 Kudos
Xilinx Employee
Xilinx Employee
9,312 Views
Registered: ‎08-01-2012

Re: What ISE software versions support Virtex 5 RAD hard (SIRF) FPGA?

Sai answered your query. In addition that the below is about  V5QV TMR support

 

For V5QV TMR the supported ISE release would be 13.2. Customer would be able to use TMR with ISE 13.2 

 

Forfurther questions/clarifications regarding this tool you can reach Aerospace & Defence team at ad_marketing@xilinx.com

________________________________________________

Please mark this post as an "Accept as solution" in case if it helped to resolve your query. So that it will help to other forum users to directly refer to the answer.

Give kudos to this post in case if you think the information is useful and reply oriented.

0 Kudos
Visitor ssvoysky
Visitor
9,297 Views
Registered: ‎07-06-2012

Re: What ISE software versions support Virtex 5 RAD hard (SIRF) FPGA?

Thanks very much for your replies.

 

Is there any path to use IP that was introduced by Xilinx after ISE 13.2.

For example I wanted to use the IO Module or MCS (Micro Controller System) introduced in ISE 14.1

 

Thanks, Sergey

0 Kudos
Xilinx Employee
Xilinx Employee
9,287 Views
Registered: ‎08-01-2012

Re: What ISE software versions support Virtex 5 RAD hard (SIRF) FPGA?

The below link information helps

http://www.xilinx.com/support/answers/17145.html

________________________________________________

Please mark this post as an "Accept as solution" in case if it helped to resolve your query. So that it will help to other forum users to directly refer to the answer.

Give kudos to this post in case if you think the information is useful and reply oriented.

0 Kudos
Visitor cvogel
Visitor
5,757 Views
Registered: ‎04-23-2013

Re: What ISE software versions support Virtex 5 RAD hard (SIRF) FPGA?

your linked answer shows how to regenerate old cores to newer versions. The question was: since the SIRF device only works up to 13.2, is it possible to regenerate a 14.1 or higher core to work on the SIRF?

0 Kudos
Highlighted
Visitor jwilkinson7
Visitor
4,206 Views
Registered: ‎11-20-2008

Re: What ISE software versions support Virtex 5 RAD hard (SIRF) FPGA?

Just checking for any update on this since 2013...

 

Is ISE 13.2 still the latest ISE version that has the SIRF overlay for Virtex-5QV family parts?

 

I sure hope you have a newer ISE with the SIRF overlay by now. 

Considering what you charge for those parts, you should be able to afford to update your tools.

--
jeff wilkinson
jwilkinson@mail.com
0 Kudos