UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Observer obizhaev
Observer
4,333 Views
Registered: ‎01-13-2014

connect single pin to vector pins in BD

Jump to solution

 Hi.

I need to make connection in BD  from single pin  of one IP to vector pin on other IP using tcl command

How to do it?

Alexandr

0 Kudos
1 Solution

Accepted Solutions
Xilinx Employee
Xilinx Employee
8,338 Views
Registered: ‎08-01-2008

Re: connect single pin to vector pins in BD

Jump to solution

I think slice is similar to split bus utility, further you can look in to Utliity logic vector, utility differential IO Buffer, RAM based shift Register blocks

Currently IPI do not have everything that ISE had, but you can package and bring ISE or Vivado primitives or custom IPs in to IPI as black box.

Please check below links



http://www.xilinx.com/support/documentation/sw_manuals/xilinx2014_2/ug939-vivado-designing-with-ip-tutorial.pdf

http://www.xilinx.com/support/answers/56612.htm

 

check this ARS

 

http://www.xilinx.com/support/answers/60844.html

Thanks and Regards
Balkrishan
--------------------------------------------------------------------------------------------
Please mark the post as an answer "Accept as solution" in case it helped resolve your query.
Give kudos in case a post in case it guided to the solution.
0 Kudos
1 Reply
Xilinx Employee
Xilinx Employee
8,339 Views
Registered: ‎08-01-2008

Re: connect single pin to vector pins in BD

Jump to solution

I think slice is similar to split bus utility, further you can look in to Utliity logic vector, utility differential IO Buffer, RAM based shift Register blocks

Currently IPI do not have everything that ISE had, but you can package and bring ISE or Vivado primitives or custom IPs in to IPI as black box.

Please check below links



http://www.xilinx.com/support/documentation/sw_manuals/xilinx2014_2/ug939-vivado-designing-with-ip-tutorial.pdf

http://www.xilinx.com/support/answers/56612.htm

 

check this ARS

 

http://www.xilinx.com/support/answers/60844.html

Thanks and Regards
Balkrishan
--------------------------------------------------------------------------------------------
Please mark the post as an answer "Accept as solution" in case it helped resolve your query.
Give kudos in case a post in case it guided to the solution.
0 Kudos