UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Observer anis1133
Observer
342 Views
Registered: ‎05-06-2019

[filemgmt 20-2001] Source scanning failed; all the source files are shown under Non-module Files folder

Jump to solution

Hi All,

Tool : Vivado 2018.1

windows 1 : 64 bits

When I try to create/add a new ,it goes under Non-module Files even if there are no errors in the files.

please help me !!!

Capture d’écran (12).png

0 Kudos
1 Solution

Accepted Solutions
Moderator
Moderator
266 Views
Registered: ‎03-16-2017

Re: [filemgmt 20-2001] Source scanning failed; all the source files are shown under Non-module Files folder

Jump to solution

Hi @anis1133 , 

As per UG973 the supported version of windows 10 is fall creators update which is 1803. Please upgrade your windows to 1803 version. 

DId you follow syed's comments as mentioned in last thread?

And is your PC's language set to english? If no please set and check. 

Regards,
hemangd

Don't forget to give kudos and mark it as accepted solution if your issue gets resolved.
6 Replies
Moderator
Moderator
339 Views
Registered: ‎01-16-2013

Re: [filemgmt 20-2001] Source scanning failed; all the source files are shown under Non-module Files folder

Jump to solution

@anis1133 

 

There seems to be a syntax error in the files. Can you show us the files in non-module reference? Also click on the highlited text (2) to see the critical warning.

image.png

 

Are you trying to create the wrapper for block design? You can right click on block design and select create HDL wrapper so that tool will generate the RTL file for your block design which will be picked as top module for synthesis and Implementation.

 

--Syed

---------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.

Did you check our new quick reference timing closure guide (UG1292)?
---------------------------------------------------------------------------------------------
Highlighted
Observer anis1133
Observer
320 Views
Registered: ‎05-06-2019

Re: [filemgmt 20-2001] Source scanning failed; all the source files are shown under Non-module Files folder

Jump to solution
 
Capture d’écran (14).png
0 Kudos
Moderator
Moderator
296 Views
Registered: ‎01-16-2013

Re: [filemgmt 20-2001] Source scanning failed; all the source files are shown under Non-module Files folder

Jump to solution

@anis1133 

 

Right click on design_1_wrapper.vhd file and select "Remove file from project". In the pop up box, select "Also delete the project local file/directory from disk"

 

Now Open the block design and run validation (Validate the design F6). If the validation is successful then you can create the wrapper by right-clicking on design_1.bd file and select "Create HDL wrapper".

Can you open the block design and show the block diagram?

 

--Syed

--Syed 

---------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.

Did you check our new quick reference timing closure guide (UG1292)?
---------------------------------------------------------------------------------------------
Moderator
Moderator
289 Views
Registered: ‎03-16-2017

Re: [filemgmt 20-2001] Source scanning failed; all the source files are shown under Non-module Files folder

Jump to solution

Hi @anis1133 ,

If you are facing warnings while validation then it is recommended that you resolve those warnings before creating a wrapper.

Which Windows 10 version are you using?

Regards,
hemangd

Don't forget to give kudos and mark it as accepted solution if your issue gets resolved.
0 Kudos
Observer anis1133
Observer
270 Views
Registered: ‎05-06-2019

Re: [filemgmt 20-2001] Source scanning failed; all the source files are shown under Non-module Files folder

Jump to solution
 
Capture d’écran (15).png
0 Kudos
Moderator
Moderator
267 Views
Registered: ‎03-16-2017

Re: [filemgmt 20-2001] Source scanning failed; all the source files are shown under Non-module Files folder

Jump to solution

Hi @anis1133 , 

As per UG973 the supported version of windows 10 is fall creators update which is 1803. Please upgrade your windows to 1803 version. 

DId you follow syed's comments as mentioned in last thread?

And is your PC's language set to english? If no please set and check. 

Regards,
hemangd

Don't forget to give kudos and mark it as accepted solution if your issue gets resolved.