UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Observer abhishek7
Observer
2,755 Views
Registered: ‎03-20-2017

netlist encryption

Hi I have encrypted my design sources with IEEE1735 in vivado 2016.4 and i generated a netlist(.v) with encrypted sources,now i have a doubt that is the netlist obtained is encrypted netlist or non encrypted netlist

 

 

Thanks

regards

Abhishek

0 Kudos
3 Replies
Xilinx Employee
Xilinx Employee
2,700 Views
Registered: ‎07-31-2012

Re: netlist encryption

Can't you open the netlist and check if it is encrypted?
Thanks,
Anirudh

PS: Please MARK this as an answer in case it helped resolve your query.Give kudos in case the post guided you to a solution.
0 Kudos
Xilinx Employee
Xilinx Employee
2,698 Views
Registered: ‎08-01-2012

Re: netlist encryption

Try with  (*secure_netlist= "ENCRYPT" *) and (*secure_config= "PROTECT" *)  when you generate the netlists in Vivado, 

________________________________________________

Please mark this post as an "Accept as solution" in case if it helped to resolve your query. So that it will help to other forum users to directly refer to the answer.

Give kudos to this post in case if you think the information is useful and reply oriented.

0 Kudos
Highlighted
578 Views
Registered: ‎11-27-2017

Re: netlist encryption

Hi @umamahe

May I ask where are these two lines supposed to be inserted in? The encryption keyfile or somewhere else? Thanks,
0 Kudos