UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor afandia
Visitor
14,202 Views
Registered: ‎02-17-2009

Does PlanAhead 11.1 Support Partial Reconfiguration?

Jump to solution

Hi,

 

I just download PlanAhead 11.1 to use with Xilinx ISE 9.2i and EDK 9.2i for partial reconfiguration.

Unfortunately, it seems that it can not work together.

 

Does anyone know about this?

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Visitor vekin06
Visitor
21,010 Views
Registered: ‎05-21-2009

Re: Does PlanAhead 11.1 Support Partial Reconfiguration?

Jump to solution

Hi,

 

I have the same probleme!

 

No graphic option to set my project as reconfigurable, so I did it with the command line: "hdi::pr setProject -name project_1"

 

Problem: It seems that we now need a other licence just for PR. 

 

Does anyone can help?

Message Edited by vekin06 on 05-21-2009 08:18 AM
Message Edited by vekin06 on 05-21-2009 08:24 AM
Message Edited by vekin06 on 05-21-2009 08:43 AM
0 Kudos
3 Replies
Highlighted
Visitor vekin06
Visitor
21,011 Views
Registered: ‎05-21-2009

Re: Does PlanAhead 11.1 Support Partial Reconfiguration?

Jump to solution

Hi,

 

I have the same probleme!

 

No graphic option to set my project as reconfigurable, so I did it with the command line: "hdi::pr setProject -name project_1"

 

Problem: It seems that we now need a other licence just for PR. 

 

Does anyone can help?

Message Edited by vekin06 on 05-21-2009 08:18 AM
Message Edited by vekin06 on 05-21-2009 08:24 AM
Message Edited by vekin06 on 05-21-2009 08:43 AM
0 Kudos
Newbie wang74
Newbie
13,924 Views
Registered: ‎06-18-2009

Re: Does PlanAhead 11.1 Support Partial Reconfiguration?

Jump to solution
But ,as you said,PlanAhead 11.1 did not support partial reconfiguration?
0 Kudos
Xilinx Employee
Xilinx Employee
13,450 Views
Registered: ‎08-10-2007

Re: Does PlanAhead 11.1 Support Partial Reconfiguration?

Jump to solution
The PR flow for PlanAhead 11.1 is quite different from how it was in the previous versions of PR/PlanAhead.  You should use PlanAhead 10.1.8 for ISE 9.2i PR designs.
0 Kudos