UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor deanmiller
Visitor
8,400 Views
Registered: ‎10-29-2009

ERROR: [PlanAhead 12-172] File or Directory 'cores' does not exist

I have a trivial test case that throws an error when launching PlanAhead.  There are no cores in the design.

 

The synthesis was done using Mentor's Leonardo Spectrum.  Place and route was done using ISE 14.7, and no errors were reported.  But when running the IO Pin Planning I get an error in the Tcl Console (see below).

 

Any suggestions about how to work around this will be most appreciated.

 

Thanks in advance!

D

 

source C:/Users/dean/_p4L2/HDS_data/HDS_projects/foo/rf_breadboard/1/rf_bbd_lib/ise/a_rf_bbd_struct/pa.fromNetlist.tcl
# create_project -name a_rf_bbd_edif -dir "C:/Users/dean/_p4L2/HDS_data/HDS_projects/foo/rf_breadboard/1/rf_bbd_lib/ise/a_rf_bbd_struct/planAhead_run_1" -part xc6slx45tfgg484-3
# set_property design_mode GateLvl [get_property srcset [current_run -impl]]
# set_property edif_top_file "C:/Users/dean/_p4L2/HDS_data/HDS_projects/foo/rf_breadboard/1/rf_bbd_lib/ls/a_rf_bbd_struct/netlists/a_rf_bbd.edf" [ get_property srcset [ current_run ] ]
# add_files -norecurse { {C:/Users/dean/_p4L2/HDS_data/HDS_projects/foo/rf_breadboard/1/rf_bbd_lib/ise/a_rf_bbd_struct} {../../ls/a_rf_bbd_struct/netlists} {cores} }
ERROR: [PlanAhead 12-172] File or Directory 'cores' does not exist

    while executing
"add_files -norecurse { {C:/Users/dean/_p4L2/HDS_data/HDS_projects/foo/rf_breadboard/1/rf_bbd_lib/ise/a_rf_bbd_struct} {../../ls/a_rf_bbd_struct/ne..."
    (file "C:/Users/dean/_p4L2/HDS_data/HDS_projects/foo/rf_breadboard/1/rf_bbd_lib/ise/a_rf_bbd_struct/pa.fromNetlist.tcl" line 7)

0 Kudos
2 Replies
Visitor gloryhunter
Visitor
7,866 Views
Registered: ‎07-31-2013

Re: ERROR: [PlanAhead 12-172] File or Directory 'cores' does not exist

We are currently have the same issue. We were able to launch the tool sucessfully by manually executing the remaining script. We are running 14.6 for this task.

0 Kudos
Visitor gloryhunter
Visitor
7,864 Views
Registered: ‎07-31-2013

Re: ERROR: [PlanAhead 12-172] File or Directory 'cores' does not exist

If someone knows were the auto-generated file comes from you can add the -quite command to have it ignore this error
0 Kudos