cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
icefish711
Observer
Observer
9,190 Views
Registered: ‎07-26-2009

Error:Map:95 using Planahead10.1,

I use planahead10.1 +ISE10.1 trying to do early acess partial reconfiguration. block bm_base_prm and block bm_prm_base is bus marco between prm and statistic module. and However I always encounter this error:

in report:

 

Section 1 - Errors
------------------
ERROR:Map:95 - Every module in the design should have an AREA_GROUP property.
   There is no AREA_GROUP property on module root block bm_base_prm.
ERROR:Map:95 - Every module in the design should have an AREA_GROUP property.
   There is no AREA_GROUP property on module root block bm_prm_base.
can anyone help me solve this ?

---------------

when I use exactly source files synthsized in ISE9.1sp2, and run PR in planahead10.1, it just work. of cousre ISE9.1 has a speciall PR_flow software. ISE10.1 don't have this patch in website so I asume that it have integrated into ISE install package. Or ISE10.1 just can't support EAPR

0 Kudos
1 Reply
davidd
Xilinx Employee
Xilinx Employee
9,173 Views
Registered: ‎11-17-2008

The Modular Design (EA) Partial Reconfiguration flow requires ISE 9.2.04i or earlier.  We deprecated Modular Design capabilities in 10.1, so that release has no possibility of supporting PR designs.  This flow is no longer available or supported. 

 

The current Partial Reconfiguration solution was introduced last year in ISE 12.1 (with early access in 11.x) and is a much more user-friendly flow.

 

thanks,

david.

0 Kudos