cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
200982
Adventurer
Adventurer
4,425 Views
Registered: ‎10-27-2011

Partial Reconf: First Steps

Jump to solution

Hello,

 

I'm plannig a little project of Partial Reconfiguration on Zynq.

I know the tutorial ug947 and ug909, but I guess my IQ is to low.

 

Anyway, my static design is quite simple.

It consists of one PCore connected to Zynq's PS over AXI Lite.

This PCore shall become a Reconfigurable Module (RM), and a Reconfigurable Partition (RP) placed at the AXI Lite.

 

Well, for me it's not clear what are the next steps, starting from the static design.

I guess, I have to black box my PCore, or something...

 

Can somebody help me, please?

What are the next steps I have to go?

0 Kudos
1 Solution

Accepted Solutions
umamahe
Xilinx Employee
Xilinx Employee
7,937 Views
Registered: ‎08-01-2012

Please refer below documents also once and check whether you can find useful information to debug your issue

https://www.xilinx.com/support/documentation/application_notes/xapp1231-partial-reconfig-hw-accelerator-vivado.pdf

https://www.xilinx.com/support/documentation/application_notes/xapp1159-partial-reconfig-hw-accelerator-zynq-7000.pdf

https://www.xilinx.com/support/answers/64834.html  

________________________________________________

Please mark this post as an "Accept as solution" in case if it helped to resolve your query. So that it will help to other forum users to directly refer to the answer.

Give kudos to this post in case if you think the information is useful and reply oriented.

View solution in original post

0 Kudos
2 Replies
umamahe
Xilinx Employee
Xilinx Employee
7,938 Views
Registered: ‎08-01-2012

Please refer below documents also once and check whether you can find useful information to debug your issue

https://www.xilinx.com/support/documentation/application_notes/xapp1231-partial-reconfig-hw-accelerator-vivado.pdf

https://www.xilinx.com/support/documentation/application_notes/xapp1159-partial-reconfig-hw-accelerator-zynq-7000.pdf

https://www.xilinx.com/support/answers/64834.html  

________________________________________________

Please mark this post as an "Accept as solution" in case if it helped to resolve your query. So that it will help to other forum users to directly refer to the answer.

Give kudos to this post in case if you think the information is useful and reply oriented.

View solution in original post

0 Kudos
200982
Adventurer
Adventurer
4,256 Views
Registered: ‎10-27-2011

Thanks, xapp1231 helps.

0 Kudos