cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
493 Views
Registered: ‎06-22-2018

Partial Reconfiguration Block Diagram

Jump to solution

It seems clear that a partition cannot be created inside a block diagram at least as of Vivado 2017.4 but is it possible that a reconfigurable partition contains block diagram sources?

0 Kudos
Reply
1 Solution

Accepted Solutions
Moderator
Moderator
451 Views
Registered: ‎11-04-2010

Hi, @jjeisentrager ,

It's a limitation in PR flow's project mode:

IP Integrator support is not in place. Block Diagrams cannot be included as RMs or within RMs.

Modules within Block Diagrams cannot be set as RMs.

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post

0 Kudos
Reply
1 Reply
Moderator
Moderator
452 Views
Registered: ‎11-04-2010

Hi, @jjeisentrager ,

It's a limitation in PR flow's project mode:

IP Integrator support is not in place. Block Diagrams cannot be included as RMs or within RMs.

Modules within Block Diagrams cannot be set as RMs.

-------------------------------------------------------------------------
Don't forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post

0 Kudos
Reply