02-29-2016 11:12 AM
I am new to partial reconfiguration (and Vivado) and trying to implement a simple example Using prc_v1_0 on a KC705 (Kintex 7) board using Vivado 2015.3.
As mentiond on page 58 of "pg193-partial-reconfiguration-controller.pdf" I am trying to use the BPI flash available on the board.
The example I am trying to implement is exaxtly the one described in "ug947-vivado-partial-reconfiguration-tutorial.pdf". I have aready ran the example successfully. Now I want to store ale the bit streams in the BPI flash and triger partial reconfiguration using PRC and a HW triger signal. I have aready generated the memory images and programmed BPI.
My question is how should I interface the PRC core with the flash? should I use AXI EMC? If yes please help me with the configuration and connections of the AXI EMC.
02-29-2016 08:59 PM
03-01-2016 02:36 AM
Thanks for the reply.
Unfortunately the document you sent is completely irrelevant and has nothing to do with my question.
My question is about PRC interfacing Linear flash on KC705 (Kintex 7).
03-01-2016 07:53 AM
We have exactly what you are looking for -- a tutorial design for the PR Controller IP that targets the KC705. Currently it exists as a training module that our field engineers can use with customers, but at the release of Vivado 2016.1, it will be included as one of two new labs in the PR Tutorial document (UG947). Send me a private message with your email address and I can share the current version with you directly.