cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
siddadd
Observer
Observer
8,694 Views
Registered: ‎04-03-2012

Unable to Floorplan

Jump to solution

I imported my project from ISE into PlanAhead.

 

After carrying out the HDL flow and generating the bitstream, I am trying to floorplan my design.

 

The problem is none of the modules are showing up in the device tab on the right. Even when I highlight a primitive, I don't see anything. Attaching a screenshot of the same.

 

Is there some issue that can be fixed?

 

Thanks,

 

Siddharth

Tags (2)
0 Kudos
1 Solution

Accepted Solutions
tanders
Xilinx Employee
Xilinx Employee
14,204 Views
Registered: ‎03-31-2011

Look at the Implemented Design instead of the Netlist Design if you want to see the current placement.  Only constrained objects will be displayed in Netlist Design.

View solution in original post

1 Reply
tanders
Xilinx Employee
Xilinx Employee
14,205 Views
Registered: ‎03-31-2011

Look at the Implemented Design instead of the Netlist Design if you want to see the current placement.  Only constrained objects will be displayed in Netlist Design.

View solution in original post