UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Reply

partial reconfiguration Simulation error on vivado 14.2

Highlighted
Visitor
Posts: 8
Registered: ‎10-28-2016

partial reconfiguration Simulation error on vivado 14.2

Hello,

I have been looking for Partial Reconfiguration for long time,luckily i got some documents on how to do PR from the xilinx website, but when running the same step its says a .DCP(top_wrapper.dcp) file will be created but i could not find the file. I have tried multiple times but the file is not found. I have attached the step by step guide on PR execution, screen shots of my error. Please Help Me.....

Xilinx Employee
Posts: 167
Registered: ‎11-17-2008

Re: partial reconfiguration Simulation error on vivado 14.2

Mahesh,

 

The document you uploaded has neither errors nor simulation nor anything to do with Partial Reconfiguration.  Are you sure you posted the right file?  Please take a look at UG909 (User Guide) and UG947 (Tutorial) for information on the PR flow.  Here are the links for the versions appropriate for Vivado 2014.2:

https://www.xilinx.com/support/documentation/sw_manuals/xilinx2014_2/ug909-vivado-partial-reconfiguration.pdf

https://www.xilinx.com/support/documentation/sw_manuals/xilinx2014_2/ug947-vivado-partial-reconfiguration-tutorial.pdf

 

thanks,

david.