UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Voyager
Voyager
583 Views
Registered: ‎10-12-2016

write_debug_nets command data into file but that ltx file does not has net names ?

Jump to solution

Hi Friends,

 

After generating bit file , i open debug.ltx file from the runs folder but that file does not has net names , please find the attachment. 

 

 

Any help or suggestions are highly appreciated.

 

Thank you 

S Sampath 

Tags (1)
ltxfile_net_names_issue.png
0 Kudos
1 Solution

Accepted Solutions
Moderator
Moderator
741 Views
Registered: ‎10-19-2011

Re: write_debug_nets command data into file but that ltx file does not has net names ?

Jump to solution

You could also try mark_debug for the nets you selected to debug. This will add some keep constrains so the net names get preserved. This is talked about in UG908.

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos
2 Replies
Moderator
Moderator
527 Views
Registered: ‎02-09-2017

Re: write_debug_nets command data into file but that ltx file does not has net names ?

Jump to solution

Hi @ssampath,

 

How are you connecting those nets to the ILA and VIO? Did use the mark debug attribute on HDL level, or did you open the synthesized design and right-click the nets and selected "mark for debug"?

 

Can you try to open the synthesized design (with the ILA and VIO already implemented) and run the command write_debug_probes C:/<your_location>/designProbes.ltx and check if the generated file is correct?

 

Thanks,

Andre Guerrero

Product Applications Engineer

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos
Moderator
Moderator
742 Views
Registered: ‎10-19-2011

Re: write_debug_nets command data into file but that ltx file does not has net names ?

Jump to solution

You could also try mark_debug for the nets you selected to debug. This will add some keep constrains so the net names get preserved. This is talked about in UG908.

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos