Design and Debug Techniques Blog

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Design and Debug Techniques Blog

Moderator
Moderator

This blog entry is part one of our Simple Guide to Creating an Acceleration Platform for Vitis™. In this entry we will discuss how to enable your platform in the Vivado® Design Suite so that it is acceleration ready in Vitis.

Your platform can be an already established Vivado mature design that you would like to enhance to give you the flexiblity to accelerate software functions. Alternatively the platform can be a simple Vivado design that just has the topology needed for acceleration. The point being that the Vivado design used in the platform does not need to be a one-off design. It should be more organic, and change when your design needs to change.

Read more...

more
9 0 786
Moderator
Moderator

This is the second blog entry in the Acceleration Platform series.

Previously, we discussed how to create the hardware and how to pass the metadata to Vitis™ via the XSA.

In this entry we will discuss how to use this XSA and create the software images needed to accelerate your design on your target platform.

Read more...

more
1 0 680
Moderator
Moderator

This is the third blog entry in the Acceleration series. Previously, we discussed how to create the hardware and software projects. In this blog entry we will discuss how this is all packaged together in Vitis™.

Read more...

more
1 0 561
Moderator
Moderator

In the previous blog entries in this series we discussed how to create the hardware and software project. We then discussed how to package this project in Vitis™.

Next, we will be testing it in Vitis, by created a simple application that will be accelerated.

Read more...

more
1 1 475