Design and Debug Techniques Blog

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Design and Debug Techniques Blog

gnarahar
Moderator
Moderator

This entry in the Hardware simulation blog series explores the options in the HyperLynx® Waveform Viewer options and how they correlate to hardware. 

Read more...

more
4 0 1,537
gnarahar
Moderator
Moderator

You might have heard of IBIS Models and know that they are being used for Signal Integrity simulations, but aren't aware of how exactly these models are used.

If so, this blog post is for you.

In this entry we are going to use the Hyperlynx® tool and the IBIS models to go through a simple setup and run simulations. 

Read more...

more
4 0 4,165
gnarahar
Moderator
Moderator

Hello and welcome to part one of the hardware simulation blog series.

In this series we will review and explore the various Signal Integrity (SI) issues that affect today’s High-Speed Printed Circuit Board (PCB) designs and how to avoid them using simulation.

In this first entry we will look at the various models available for SI simulation, the differences between them, and which are preferrable when running an SI simulation.

Read more...

more
11 0 2,974