UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

Reply
Explorer
Posts: 297
Registered: ‎07-25-2016

Differences between reinterpret and convert blocks in SysGen

Hi

  I m curious to know the differences between the Reinterpret and Convert blocks used in SysGen modeling. I read about them , but both looked similar: Both can be used for signed to unsigned and vice versa and scaling up and down of binary values.

 

can you please help me?

thank you.

Explorer
Posts: 229
Registered: ‎10-14-2015

Re: Differences between reinterpret and convert blocks in SysGen

Hi @sai_shashi,

 

Please refer below may help:

https://forums.xilinx.com/t5/DSP%E5%B7%A5%E5%85%B7/what-s-the-difference-betwween-Convert-and-Reinterpret-Blocks/td-p/533665

 

Thanks,

Sarada

 

----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.
Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------