UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Adventurer
Adventurer
150 Views

Booting issue with Minized

I am following the "Booting MiniZed Using QSPI and eMMC" guide to learn how to create my own BSP for the Minized:

http://zedboard.org/sites/default/files/design/Booting_MiniZed_Using_QSPI_and_eMMC_2017_2_01.zip

 

I program flash with BOOT.bin and to copy image.ub  into eMMC, as indicated into Experiment 3: U-BOOT should be able to recognize eMMC and jump to it to start linux image.

 

But it fails....

 

The error message is:

"Card did not respond to voltage select!

 MMC Device 0 not found

 no mmc device at slot 0"

 

Has someone already replicated this issue or could someone test the flow?

 

Thanks

0 Kudos
1 Reply
Xilinx Employee
Xilinx Employee
84 Views

Re: Booting issue with Minized

Hi @colombini_luca

 

Try this below  fourm links, looks it will help you to solve the issue.

 

https://forums.xilinx.com/xlnx/board/crawl_message?board.id=ELINUX&message.id=20442

https://forums.xilinx.com/t5/Embedded-Linux/U-Boot-fails-to-initialize-SD-card-on-ZCU102/td-p/876818

 

Thanks & regards

Aravind

 

----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------

 

0 Kudos