UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Participant rakesh05
Participant
2,750 Views
Registered: ‎11-01-2012

After Creating my own peripheral in edk 13.1...

Jump to solution

Hello All,

 

             I wank to know something regarding " create and import peripheral" in hardware option. I have done everything according to my requirements. now i am unable to fine application tab in xilinx 13.1. How to go to application tab in 13.1

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Scholar golson
Scholar
3,500 Views
Registered: ‎04-07-2008

Re: After Creating my own peripheral in edk 13.1...

Jump to solution

Hi,

  If you are asking about the software application tab it is not available in EDK for version 13.1.  You would need to use

SDK to write software applications for your design.

   Gary

 

 

0 Kudos
2 Replies
Highlighted
Scholar golson
Scholar
3,501 Views
Registered: ‎04-07-2008

Re: After Creating my own peripheral in edk 13.1...

Jump to solution

Hi,

  If you are asking about the software application tab it is not available in EDK for version 13.1.  You would need to use

SDK to write software applications for your design.

   Gary

 

 

0 Kudos
Participant rakesh05
Participant
2,723 Views
Registered: ‎11-01-2012

Re: After Creating my own peripheral in edk 13.1...

Jump to solution

Hello gary,

 

               Problem solved, Now my custom ip is done and i am seeing my ip , with my ip name (not generic or none) now the main issue with me is driver development for my custom ip. so, please suggest me how to start i know how to write driver and insert in the kernel only need is how to write driver for custom ip. i think i am clear to you.

 

Thanks in advance.

0 Kudos