UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Participant lizhang86
Participant
640 Views
Registered: ‎04-25-2017

BSP generation Error after update hdf file

Jump to solution

Hi there,

 

    Since SDK 2018.2, regenerating BSP with a new hdf file fails every time for me.  However, everything works fine if I create a new project with a new BSP based on same hardware platform.  There're a few post with the similar issue like this but I couldn't find an official solution.  Is this a known issue for SDK 2018.2?   I have attached the sdk log and thanks for sharing any insight on this issue.

 

Li

 

0 Kudos
1 Solution

Accepted Solutions
Xilinx Employee
Xilinx Employee
565 Views
Registered: ‎12-21-2016

Re: BSP generation Error after update hdf file

Jump to solution

Hi

 

Yes, this is a known issue in R5. This issue is fixed in 2018.3

 

Please remove the "sleep_timer" from mss and you will be able to update HDF File.

 

Please let us know if this doesn't work for you

Regards,
Raju
----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.

0 Kudos
2 Replies
Moderator
Moderator
572 Views
Registered: ‎10-06-2016

Re: BSP generation Error after update hdf file

Jump to solution
Hi @lizhang86,

What do you mean with regenerating the BSP with new HDF file? I guess you mean re-exporting the HDF file from Vivado to SDK so the BSP is regenerated, isn't it?

Regards
Ibai

Ibai
Don’t forget to reply, kudo, and accept as solution.
0 Kudos
Xilinx Employee
Xilinx Employee
566 Views
Registered: ‎12-21-2016

Re: BSP generation Error after update hdf file

Jump to solution

Hi

 

Yes, this is a known issue in R5. This issue is fixed in 2018.3

 

Please remove the "sleep_timer" from mss and you will be able to update HDF File.

 

Please let us know if this doesn't work for you

Regards,
Raju
----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.

0 Kudos