UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Adventurer
Adventurer
263 Views
Registered: ‎12-18-2018

Bit file generation for fpga of ZCU104 ZYNQ Board and programming the PL

Hi,

I want to program the PL of ZCU104 ZYNQ board from Petalinux running on board and test the PL from PS using sample application and also how to generate .bit file from Petalinux build   to program FPGA of board and run the application which would accelerate the FPGA(PL) from PS of the board. Couls anyone help me steps to proceed above points.

 

Thanks,

Raghuram

 

0 Kudos
4 Replies
Adventurer
Adventurer
193 Views
Registered: ‎12-18-2018

Re: Bit file generation for fpga of ZCU104 ZYNQ Board and programming the PL

Hi ALL,

 

Could anyone help me on this question . I will be thankful to them.

regards,

Raghuram

 

 

0 Kudos
Moderator
Moderator
156 Views
Registered: ‎03-19-2014

Re: Bit file generation for fpga of ZCU104 ZYNQ Board and programming the PL

Look in UG1144

-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------
0 Kudos
Moderator
Moderator
96 Views
Registered: ‎09-12-2007

Re: Bit file generation for fpga of ZCU104 ZYNQ Board and programming the PL

You can use the fpga manager to prog the PL in Linux:

https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18842056/FPGA+Manager+ZCU102

0 Kudos
Adventurer
Adventurer
94 Views
Registered: ‎12-18-2018

Re: Bit file generation for fpga of ZCU104 ZYNQ Board and programming the PL

Hi Stephen,
Thanks for your reply I will try with this steps.

Thanks,
Raghuram
0 Kudos