cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
3,973 Views
Registered: ‎11-21-2010

Cable connection failed. Cable autodetection failed.

Hi all,

Hi all,

 

 

 i am using EDK10.1 to test the UART connection using xc3s1500fg676-4 board in xps environment. when iam going to download the bitstream through RS232-2 ,the message i received as,

Hi all,

 

 

 i am using EDK10.1 to test the UART connection using xc3s1500fg676-4 board in xps environment. when iam going to download the bitstream through RS232-2 ,the message i received as,

 

impact -batch etc/download.cmd
Release 10.1 - iMPACT K.31 (nt)
Copyright (c) 1995-2008 Xilinx, Inc.  All rights reserved.
Preference Table
Name                 Setting             
StartupClock         Auto_Correction     
AutoSignature        False               
KeepSVF              False               
ConcurrentMode       False               
UseHighz             False               
ConfigOnFailure      Stop                
UserLevel            Novice              
MessageLevel         Detailed            
svfUseTime           false               
SpiByteSwap          Auto_Correction     
AutoDetecting cable. Please wait.
Connecting to cable (Parallel Port - LPT1).
Checking cable driver.
 Driver windrvr6.sys version = 9.0.0.993.
Connecting to cable (Parallel Port - LPT2).
Checking cable driver.
 Driver windrvr6.sys version = 9.0.0.993.
Connecting to cable (Parallel Port - LPT3).
Checking cable driver.
 Driver windrvr6.sys version = 9.0.0.993.
Connecting to cable (Parallel Port - LPT4).
Checking cable driver.
 Driver windrvr6.sys version = 9.0.0.993.
Connecting to cable (Usb Port - USB21).
Checking cable driver.
 Driver file xusb_xlp.sys found.
 Driver version: src=1029, dest=1029.
 Driver windrvr6.sys version = 9.0.0.993.Cable connection failed.
Connecting to cable (Usb Port - USB22).
Checking cable driver.
 Driver file xusb_xlp.sys found.
 Driver version: src=1029, dest=1029.
 Driver windrvr6.sys version = 9.0.0.993.
Connecting to cable (Usb Port - USB23).
Checking cable driver.
 Driver file xusb_xlp.sys found.
 Driver version: src=1029, dest=1029.
 Driver windrvr6.sys version = 9.0.0.993.Cable connection failed.
Connecting to cable (Usb Port - USB24).
Checking cable driver.
 Driver file xusb_xlp.sys found.
 Driver version: src=1029, dest=1029.
 Driver windrvr6.sys version = 9.0.0.993.
Cable connection failed.
Cable autodetection failed.
 Count ReleaseSemaphore rc = 298.
Done!

Hi all,

 

 

 i am using EDK10.1 to test the UART connection using xc3s1500fg676-4 board in xps environment. when iam going to download the bitstream through RS232-2 ,the message i received as,

 

impact -batch etc/download.cmd
Release 10.1 - iMPACT K.31 (nt)
Copyright (c) 1995-2008 Xilinx, Inc.  All rights reserved.
Preference Table
Name                 Setting             
StartupClock         Auto_Correction     
AutoSignature        False               
KeepSVF              False               
ConcurrentMode       False               
UseHighz             False               
ConfigOnFailure      Stop                
UserLevel            Novice              
MessageLevel         Detailed            
svfUseTime           false               
SpiByteSwap          Auto_Correction     
AutoDetecting cable. Please wait.
Connecting to cable (Parallel Port - LPT1).
Checking cable driver.
 Driver windrvr6.sys version = 9.0.0.993.
Connecting to cable (Parallel Port - LPT2).
Checking cable driver.
 Driver windrvr6.sys version = 9.0.0.993.
Connecting to cable (Parallel Port - LPT3).
Checking cable driver.
 Driver windrvr6.sys version = 9.0.0.993.
Connecting to cable (Parallel Port - LPT4).
Checking cable driver.
 Driver windrvr6.sys version = 9.0.0.993.
Connecting to cable (Usb Port - USB21).
Checking cable driver.
 Driver file xusb_xlp.sys found.
 Driver version: src=1029, dest=1029.
 Driver windrvr6.sys version = 9.0.0.993.Cable connection failed.
Connecting to cable (Usb Port - USB22).
Checking cable driver.
 Driver file xusb_xlp.sys found.
 Driver version: src=1029, dest=1029.
 Driver windrvr6.sys version = 9.0.0.993.
Connecting to cable (Usb Port - USB23).
Checking cable driver.
 Driver file xusb_xlp.sys found.
 Driver version: src=1029, dest=1029.
 Driver windrvr6.sys version = 9.0.0.993.Cable connection failed.
Connecting to cable (Usb Port - USB24).
Checking cable driver.
 Driver file xusb_xlp.sys found.
 Driver version: src=1029, dest=1029.
 Driver windrvr6.sys version = 9.0.0.993.
Cable connection failed.
Cable autodetection failed.
 Count ReleaseSemaphore rc = 298.
Done!

 

Hi all,

 

 

 i am using EDK10.1 to test the UART connection using xc3s1500fg676-4 board in xps environment. when iam going to download the bitstream through RS232-2 ,the message i received as,

 

impact -batch etc/download.cmd
Release 10.1 - iMPACT K.31 (nt)
Copyright (c) 1995-2008 Xilinx, Inc.  All rights reserved.
Preference Table
Name                 Setting             
StartupClock         Auto_Correction     
AutoSignature        False               
KeepSVF              False               
ConcurrentMode       False               
UseHighz             False               
ConfigOnFailure      Stop                
UserLevel            Novice              
MessageLevel         Detailed            
svfUseTime           false               
SpiByteSwap          Auto_Correction     
AutoDetecting cable. Please wait.
Connecting to cable (Parallel Port - LPT1).
Checking cable driver.
 Driver windrvr6.sys version = 9.0.0.993.
Connecting to cable (Parallel Port - LPT2).
Checking cable driver.
 Driver windrvr6.sys version = 9.0.0.993.
Connecting to cable (Parallel Port - LPT3).
Checking cable driver.
 Driver windrvr6.sys version = 9.0.0.993.
Connecting to cable (Parallel Port - LPT4).
Checking cable driver.
 Driver windrvr6.sys version = 9.0.0.993.
Connecting to cable (Usb Port - USB21).
Checking cable driver.
 Driver file xusb_xlp.sys found.
 Driver version: src=1029, dest=1029.
 Driver windrvr6.sys version = 9.0.0.993.Cable connection failed.
Connecting to cable (Usb Port - USB22).
Checking cable driver.
 Driver file xusb_xlp.sys found.
 Driver version: src=1029, dest=1029.
 Driver windrvr6.sys version = 9.0.0.993.
Connecting to cable (Usb Port - USB23).
Checking cable driver.
 Driver file xusb_xlp.sys found.
 Driver version: src=1029, dest=1029.
 Driver windrvr6.sys version = 9.0.0.993.Cable connection failed.
Connecting to cable (Usb Port - USB24).
Checking cable driver.
 Driver file xusb_xlp.sys found.
 Driver version: src=1029, dest=1029.
 Driver windrvr6.sys version = 9.0.0.993.
Cable connection failed.
Cable autodetection failed.
 Count ReleaseSemaphore rc = 298.
Done!

 

 

i can't download the application in fpga. can anyone help me?

0 Kudos
3 Replies
viper1109
Visitor
Visitor
3,951 Views
Registered: ‎10-15-2010

i think the software is serching for a jtag/isp cable.

0 Kudos
3,917 Views
Registered: ‎11-21-2010

i think so. and i uninstalled and reinstall the software. still this problem exit.  what can i debug this?

0 Kudos
xiaofeip_dup
Xilinx Employee
Xilinx Employee
3,909 Views
Registered: ‎08-07-2007

To configure the FPGA, you will need a JTAG programming cable.

 

-Felix

0 Kudos