UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Observer josephchau77
Observer
582 Views
Registered: ‎09-16-2018

Documentation UG1186 OpenAMP example coding

Jump to solution

 

Hello all

 

I try to followed example from doc UG1186 to implement OpenAMP

running the Matrix multiplication test.  Does any one know where 

can I get implementation/coding for this example test.

 

best regards

joe chau 

0 Kudos
1 Solution

Accepted Solutions
Observer josephchau77
Observer
537 Views
Registered: ‎09-16-2018

Re: Documentation UG1186 OpenAMP example coding

Jump to solution

Thanks you

 

I found it 

best regards

joe chau

0 Kudos
3 Replies
Xilinx Employee
Xilinx Employee
552 Views
Registered: ‎08-20-2018

Re: Documentation UG1186 OpenAMP example coding

Jump to solution

@josephchau77

 

Please check this https://github.com/Xilinx/open-amp/blob/xilinx-v2018.2/apps/matrix_multiply/matrix_multiply.c

 

Best Regards,

Nutan

 

------------------------------------------

Please do not forget to reply, kudo and accept as a solution

Best Regards,
Nutan
-------------------------------------------------------------------------------
Please don't forget to reply, kudo and accept as a solution
0 Kudos
Highlighted
Observer josephchau77
Observer
539 Views
Registered: ‎09-16-2018

Re: Documentation UG1186 OpenAMP example coding

Jump to solution

 

Hello Nutang

 

Thanks for your help, this is coding for RPU (slave/remote processor side)

where can I found APU coding (master).    

I also try to run a simple ECHO test, where do I find complete coding

for this test (including APU/RPU side)

 

Best Regards

joe chau

0 Kudos
Observer josephchau77
Observer
538 Views
Registered: ‎09-16-2018

Re: Documentation UG1186 OpenAMP example coding

Jump to solution

Thanks you

 

I found it 

best regards

joe chau

0 Kudos