UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Participant elaa82
Participant
5,804 Views
Registered: ‎02-13-2010

EDK 10.1 WITH VISTA

Jump to solution

 

Hi

 

Will EDK10.1 support windows vista home basic (32 bit) version?

 

bcaz

 

i am getting following errors :

 

ERROR:ConstraintSystem:8 - The file 'system.ucf' could not be opened for reading.

 

and

 

ERROR:Xflow - Program ngdbuild returned error code 2. Aborting flow execution...
make: *** [__xps/system_routed] Error 1

 

and i have full admin rights in the pc.

 

 

0 Kudos
1 Solution

Accepted Solutions
Xilinx Employee
Xilinx Employee
7,466 Views
Registered: ‎08-02-2007

Re: EDK 10.1 WITH VISTA

Jump to solution

Hi,

 

This issue might be because of permissions of the project location. Please follow this procedure:



1. Open xbash

2. Change the permission of 'data' directory as follows:

> chmod 777 data

3. Go into 'data' directory and change the permission of system.ucf file as well.

> chmod 777 system.ucf

Thnx

----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------
6 Replies
Xilinx Employee
Xilinx Employee
7,467 Views
Registered: ‎08-02-2007

Re: EDK 10.1 WITH VISTA

Jump to solution

Hi,

 

This issue might be because of permissions of the project location. Please follow this procedure:



1. Open xbash

2. Change the permission of 'data' directory as follows:

> chmod 777 data

3. Go into 'data' directory and change the permission of system.ucf file as well.

> chmod 777 system.ucf

Thnx

----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------
Participant elaa82
Participant
5,791 Views
Registered: ‎02-13-2010

Re: EDK 10.1 WITH VISTA

Jump to solution

Hi...

Thanks for your reply...

and i have one more doubt.

I installed "Xilinx 10.1" in "D" drive of my laptop. Operating system is installed in "C' drive.

Is this create any problem?


0 Kudos
Xilinx Employee
Xilinx Employee
5,787 Views
Registered: ‎08-02-2007

Re: EDK 10.1 WITH VISTA

Jump to solution

Hi,

 

It should not be a problem.

 

Thnx

----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------
0 Kudos
Participant elaa82
Participant
5,771 Views
Registered: ‎02-13-2010

Re: EDK 10.1 WITH VISTA

Jump to solution

Hi

 

problem solved.

 

thank u.

 

 

0 Kudos
Newbie caoxuan21
Newbie
5,619 Views
Registered: ‎08-05-2010

Re: EDK 10.1 WITH VISTA

Jump to solution

hello,   I am a starter .   I can not find xbash .  what is a xbash?    now I  meet  the same problem .  I can not solve it.

help please.......

0 Kudos
Highlighted
Observer thobmei
Observer
5,609 Views
Registered: ‎05-28-2010

Re: EDK 10.1 WITH VISTA

Jump to solution

 

try xbash in the dos command promt ...

xbash --help should give you some advice when needet ...

 

might that helps to ...

http://www.xilinx.com/support/answers/31374.htm

Tags (3)
0 Kudos