UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Explorer
Explorer
1,865 Views
Registered: ‎11-28-2011

Effort to migrate from SSRAM to SDRAM

Have a legacy design with a V5 and an external SSRAM device, which are used to communicate with a MPC7448 processor. Was wondering if anyone can chime in on the amount of effort required to change from the SSRAM device to an SDRAM device. Not sure of the design rationale behind the selection of SSRAM, but I'm wondering if I can possibly pitch the change to SDRAM, as I see that I would then use the MIG, as opposed to this custom SSRAM controller that is currently being used.

 

Ease of migration for FPGA (low--high)

Ease of migration for software modification  (low--high)

Tags (4)
0 Kudos