UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor spring1919
Visitor
1,455 Views
Registered: ‎11-11-2017

How to merge a .bit file from the .elf file in the SDK and the .bit file in Vivado

Jump to solution

Hello:

   My hardware configuration is a XC7K410T and a configuration SPI-FLASH,I call MicroBlaze ip core of XC7K410T, configure the AD9361, debugging has been configured in the SDK, and I need to .elf files and FPGA .bit file merged into A .bit files ,i do not know how to merge, thank you for your help!

0 Kudos
1 Solution

Accepted Solutions
Moderator
Moderator
1,362 Views
Registered: ‎07-01-2015

Re: How to merge a .bit file from the .elf file in the SDK and the .bit file in Vivado

Jump to solution

Hi @spring1919,

 

You can also use updatemem command in XSCT console.

Please go through https://www.xilinx.com/support/answers/63041.html for the command.

Thanks,
Arpan
----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------
0 Kudos
4 Replies
Scholar hbucher
Scholar
1,449 Views
Registered: ‎03-22-2016

Re: How to merge a .bit file from the .elf file in the SDK and the .bit file in Vivado

Jump to solution

@spring1919 From SDK, select the Elf Project then go Tools/ Create Image file in menu. Do not forget to generate the FSBL project as well otherwise it won't boot.

https://youtu.be/09nQlWMGmFU

 

vitorian.com --- We do this for fun. Always give kudos. Accept as solution if your question was answered.
I will not answer to personal messages - use the forums instead.
Highlighted
Visitor spring1919
Visitor
1,391 Views
Registered: ‎11-11-2017

Re: How to merge a .bit file from the .elf file in the SDK and the .bit file in Vivado

Jump to solution

thank you for your reply.

Scholar hbucher
Scholar
1,378 Views
Registered: ‎03-22-2016

Re: How to merge a .bit file from the .elf file in the SDK and the .bit file in Vivado

Jump to solution

@spring1919 If my answer works for you, feel free to accept it as a solution!

vitorian.com --- We do this for fun. Always give kudos. Accept as solution if your question was answered.
I will not answer to personal messages - use the forums instead.
0 Kudos
Moderator
Moderator
1,363 Views
Registered: ‎07-01-2015

Re: How to merge a .bit file from the .elf file in the SDK and the .bit file in Vivado

Jump to solution

Hi @spring1919,

 

You can also use updatemem command in XSCT console.

Please go through https://www.xilinx.com/support/answers/63041.html for the command.

Thanks,
Arpan
----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------
0 Kudos