UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Observer jirhus
Observer
3,736 Views
Registered: ‎06-19-2013

I can't load and debug any elf file

Jump to solution

Hello,

I'm beginning with Zynq Board ZC702. I'm trying make helloworld application. But when I want to debug application, I can't load elt file to the board. I'm using SDK 14.3 (I have tried also new SDK 14.6, but it crasches in the same place - xmd.exe). In the Attachment is the output. There is also output, when I run 'connect arm hw' in xmd console:

 

XMD%
XMD% connect arm hw
Could not power-up the DAP (0xffffffff)

JTAG chain configuration
--------------------------------------------------
Device   ID Code        IR Length    Part Name
 1       4ba00477           4        Cortex-A9
 2       03727093           6        XC7Z020
ERROR:
XMD%

 

Win8, 32bit.

Thanks.

error.PNG
0 Kudos
1 Solution

Accepted Solutions
Highlighted
Observer jirhus
Observer
4,633 Views
Registered: ‎06-19-2013

Re: I can't load and debug any elf file

Jump to solution

I solved my problem. A have connected FMC 105 debug card in the FMC slot and it made this problemm. Without card is it OK.

0 Kudos
3 Replies
Highlighted
Observer jirhus
Observer
4,634 Views
Registered: ‎06-19-2013

Re: I can't load and debug any elf file

Jump to solution

I solved my problem. A have connected FMC 105 debug card in the FMC slot and it made this problemm. Without card is it OK.

0 Kudos
Visitor jeongok.park
Visitor
3,640 Views
Registered: ‎06-30-2013

Re: I can't load and debug any elf file

Jump to solution

I've had same problem ,but in mycase I want to use FMC 105 debug card with Zynq702 board .

 

Why I can not use FMC105 debug card with Zynq702 board ?

 

0 Kudos
Observer jirhus
Observer
3,524 Views
Registered: ‎06-19-2013

Re: I can't load and debug any elf file

Jump to solution

If you want to use FMC105 card, you must connect TDI and TDO pins on J5 header.  Then JTAG works...

0 Kudos