cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
Voyager
Voyager
612 Views
Registered: ‎07-28-2008

Is there a .log for SDK console message (2019.1)?

Jump to solution

Hi all,

My SDK freezes during flash programming, just wondering if there is a method to save console message into a log file or maybe it's already there.

Please comment,

Regards,

Tags (3)
0 Kudos
1 Solution

Accepted Solutions
Highlighted
Moderator
Moderator
576 Views
Registered: ‎06-27-2017

Hi @legendbb 

 

Can you open XSCT console and run the below command to program the flash 

program_flash -f <path>/BOOT.bin -flash_type qspi_single -blank_check -fsbl fsbl.elf -verify -cable -type xilinx_tcf url tcp:localhost:3121

You will have the logs on the console to copy.

Best Regards
Kranthi
--------------------------
Don't forget to reply, kudo, and accept as solution.

View solution in original post

1 Reply
Highlighted
Moderator
Moderator
577 Views
Registered: ‎06-27-2017

Hi @legendbb 

 

Can you open XSCT console and run the below command to program the flash 

program_flash -f <path>/BOOT.bin -flash_type qspi_single -blank_check -fsbl fsbl.elf -verify -cable -type xilinx_tcf url tcp:localhost:3121

You will have the logs on the console to copy.

Best Regards
Kranthi
--------------------------
Don't forget to reply, kudo, and accept as solution.

View solution in original post