UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Explorer
Explorer
3,404 Views
Registered: ‎03-25-2010

JTAG device number in download.cmd question?

Hello,

 

In my JTAG chain, the FPGA is the device number 3.

 

So I modified the download.cmd file like this:

 

setMode -bscan
setCable -p auto
identify
assignfile -p 3 -file implementation/download.bit
program -p 3
quit

 

But when I try to program my FPGA, it tryes to access the device 2, look the error message please.

 

 

FPGA configuration encountered errors.
Program FPGA failed
ERROR: Failed to download the bit file
Failed to program device 2 with bitstream D:/LDF_BOARD/v6/test_3/v6/system_ub/SDK/hw_platform_0/download.bit

 

Do I have to modify something else?

 

Thank you.

 

delbotero

 

 

 

 

0 Kudos