cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
jeevanreddymandali
Adventurer
Adventurer
1,995 Views
Registered: ‎11-03-2013

Lwip echo server RAW mode data sending problem

Hey guys,

 

I have got strange problem with Lwip echo server raw mode.

 

I generated system using EDK, based on ML410 board. In SDK i use sample project LwIP echo example. When I run the application in hardware sometimes everything works fine for a while. I can ping to my host PC but can not connect to server using telnet. I am using hyperterminal and when trting to write something on screen I get cannot connect to 192.168.1.4(my PC's ip) through port 7.

 

-----lwIP TCP echo server ------
TCP packets sent to port 6001 will be echoed back
Board IP: 192.168.1.10
Netmask : 255.255.255.0
Gateway : 192.168.1.1
TCP server established on port 7

 regards,

jeevanreddymandali
0 Kudos
Reply
0 Replies