UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Contributor
Contributor
4,637 Views
Registered: ‎05-26-2014

Matching ADDRESS_SPACE for code segment #1 not found in 'sys tem_bd.bmm'.

Jump to solution

Hello All,

              I'm getting error when i try to generate the .bin file.check below the command and the error

 

 

          

C:\*****\****\*****\*****\BIN>data2mem -bm system_bd.bmm -bd system1.elf -bt system.bit

 

ERROR:Data2MEM:33 - Matching ADDRESS_SPACE for code segment #1 not found in 'sys
tem_bd.bmm'.
Code segment #1 occupies [0x48000000:0x48002703]turnV3Test.bit

 

  can i get any help on this!!!!!!

 

  Thanks 

0 Kudos
1 Solution

Accepted Solutions
Scholar stephenm
Scholar
5,032 Views
Registered: ‎05-06-2012

Re: Matching ADDRESS_SPACE for code segment #1 not found in 'sys tem_bd.bmm'.

Jump to solution

This error is saying that the data file (either MEM or ELF) oes not have any data that is specified in the address range in the BMM file.

 

You need to fix this by changing the BMM file, or the ELF file (linker), or the MEM file so the data is within this region

0 Kudos
5 Replies
Scholar sampatd
Scholar
4,634 Views
Registered: ‎09-05-2011

Re: Matching ADDRESS_SPACE for code segment #1 not found in 'sys tem_bd.bmm'.

Jump to solution
Please check the following AR to understand why this error occurs:
http://www.xilinx.com/support/answers/21121.html
0 Kudos
Contributor
Contributor
4,622 Views
Registered: ‎05-26-2014

Re: Matching ADDRESS_SPACE for code segment #1 not found in 'sys tem_bd.bmm'.

Jump to solution

Thanks for the help.

 

I know the address map is not proper,but i then too want to add the .elf file. I even tried undating the linker script but that too didn't work.I will add the flash and try it out.

 

Any suggestion please do tell.

 

Thanks

0 Kudos
Explorer
Explorer
2,999 Views
Registered: ‎05-31-2015

Re: Matching ADDRESS_SPACE for code segment #1 not found in 'sys tem_bd.bmm'.

Jump to solution

Hi,

 

 Did you solve the problem??? I have a saturn V3 board and has same error with data2mem.

Tags (2)
0 Kudos
Scholar stephenm
Scholar
5,033 Views
Registered: ‎05-06-2012

Re: Matching ADDRESS_SPACE for code segment #1 not found in 'sys tem_bd.bmm'.

Jump to solution

This error is saying that the data file (either MEM or ELF) oes not have any data that is specified in the address range in the BMM file.

 

You need to fix this by changing the BMM file, or the ELF file (linker), or the MEM file so the data is within this region

0 Kudos
Highlighted
Contributor
Contributor
2,693 Views
Registered: ‎05-26-2014

Re: Matching ADDRESS_SPACE for code segment #1 not found in 'sys tem_bd.bmm'.

Jump to solution

Hi,

 

Yes, I did rebuild the project and updated the linker script. I does solve the problem.

 

I did that long back, sorry for late reply.

 

 

Thanks

0 Kudos