UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Observer soccerchamp
Observer
223 Views
Registered: ‎03-08-2018

Micro blaze debug

Hi all,

In UG 1043, it is mentioned that(page 10) The GDB flow is deprecated and will not be available for future devices. The System Debugger
is intended for use only with the Arm over Digilent cable.

My question is how we will debug microblaze design? what are the methods available?

Regards

SC

0 Kudos
4 Replies
Xilinx Employee
Xilinx Employee
215 Views
Registered: ‎10-21-2010

Re: Micro blaze debug

Hi @soccerchamp,

You're probabling referring to an older version of the UG. GDB debug is supported for all Xilinx processors from 2018.1. System debugger also supports MB, so you can use either of them

0 Kudos
Observer soccerchamp
Observer
212 Views
Registered: ‎03-08-2018

Re: Micro blaze debug

@sadanan 

I was reffering to  UG1043 (v2019.1) May 22, 2019. Can you please check?

0 Kudos
Highlighted
Xilinx Employee
Xilinx Employee
192 Views
Registered: ‎10-21-2010

Re: Micro blaze debug

Hi @soccerchamp,

Sorry, this note needs to be removed from the UG. You can use both GDB and System debugger for all Xilinx processors. Please refer to SDK help for more details

0 Kudos
Observer soccerchamp
Observer
189 Views
Registered: ‎03-08-2018

Re: Micro blaze debug

@sadanan 
Thanks.It helps.
But in SDK help aslo, mentioned like GDB flow is not recommended now. But XSDB flow is recommended for both ARM and microblaze. Is my understanding correct?

regards

Anoop

 

0 Kudos