UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Observer _kumar
Observer
4,267 Views
Registered: ‎12-28-2016

No VxWorks entry in Xilinx SDK V14.7 BSP window

Jump to solution

Hi There!

 

I'm trying to create a project to run VxWorks on PPC440 of Virtex 5 FPGA using Xilinx ISE 14.7.

 

I'm following the xilinx manual XAPP1114.

 

While creating a new bsp project, I'm not able to find the VxWorks entry option under OS:

XIlinx ISE 14.7 New BSP Window

 

Please suggest how to enable vxworks

 

 

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Moderator
Moderator
7,657 Views
Registered: ‎07-31-2012

Re: No VxWorks entry in Xilinx SDK V14.7 BSP window

Jump to solution

Hi,

 

If you have Vxworks BSP compiled for boards like you have pointed out for e.g. - 'C:\Xilinx\14.7\ISE_DS\EDK\sw\ThirdParty\bsp\vxworks6_7_v1_03_a it can be enabled by editing in  its MLD file.

All you need to do is make parameter OPTION OS_STATE = ACTIVE;  in .mld file.

 

Once you save the file export design to SDK and create BSP. It should generate bsp.

 

Regards

Praveen


-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post

4 Replies
Xilinx Employee
Xilinx Employee
4,200 Views
Registered: ‎08-02-2007

Re: No VxWorks entry in Xilinx SDK V14.7 BSP window

Jump to solution

hi,

 

xapp1114 is targeting EDK 10.1. can you check any previous releases?

 

--hs

----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------
Capture.png
0 Kudos
Observer _kumar
Observer
4,186 Views
Registered: ‎12-28-2016

Re: No VxWorks entry in Xilinx SDK V14.7 BSP window

Jump to solution

Hi, Thanks for your input.

 

I'm following the XAPP1114 note but, I have Xilinx ISE 14.7 version and I have to use this and generate an VxWorks v6.7 BSP.

 

I'm able to see directories in Xilinx installation related to VxWorks @ C:\Xilinx\14.7\ISE_DS\EDK\sw\ThirdParty\bsp\vxworks6_7_v1_03_a, but VxWorks option is not visible in New BSP creation window of Xilinx SDK. I'm looking on how to enable this in Xilinx SDK 14.7.

 

-Kumar

0 Kudos
Highlighted
Moderator
Moderator
7,658 Views
Registered: ‎07-31-2012

Re: No VxWorks entry in Xilinx SDK V14.7 BSP window

Jump to solution

Hi,

 

If you have Vxworks BSP compiled for boards like you have pointed out for e.g. - 'C:\Xilinx\14.7\ISE_DS\EDK\sw\ThirdParty\bsp\vxworks6_7_v1_03_a it can be enabled by editing in  its MLD file.

All you need to do is make parameter OPTION OS_STATE = ACTIVE;  in .mld file.

 

Once you save the file export design to SDK and create BSP. It should generate bsp.

 

Regards

Praveen


-------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------

View solution in original post

Observer _kumar
Observer
4,076 Views
Registered: ‎12-28-2016

Re: No VxWorks entry in Xilinx SDK V14.7 BSP window

Jump to solution

Hi @pvenugo, Thanks for your reply and it works. I'm able to create vxworks bsp in xilinx 14p7 SDK.

0 Kudos