UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Adventurer
Adventurer
3,343 Views
Registered: ‎05-01-2017

QT or other GUI application on FreeRTOS

Jump to solution

HI Xilinx,

 

            zedboard, FreeRTOS, vivado/SDK 2016.2

 

I am wondering whether QT or other GuI application can be applied on FreeRTOS.

 

Please advise. Thanks in advance.

 

Mike

0 Kudos
1 Solution

Accepted Solutions
Scholar hbucher
Scholar
4,890 Views
Registered: ‎03-22-2016

Re: QT or other GUI application on FreeRTOS

Jump to solution

@exds75

 

https://github.com/ryankurte/micro-gui

 

EasyGUI (www.easygui.com) but it is not open source and not free.

 

 uGFX https://ugfx.io/ also commercial.

 

I have never used any of these btw

 

 

 

vitorian.com --- We do this for fun. Always give kudos. Accept as solution if your question was answered.
I will not answer to personal messages - use the forums instead.
0 Kudos
4 Replies
Scholar hbucher
Scholar
3,320 Views
Registered: ‎03-22-2016

Re: QT or other GUI application on FreeRTOS

Jump to solution

@exds75  Qt on Unix is built on top of the Posix layer. I am not sure about the level of support to Posix on FreeRTOS+IO. It might require some major tinkering to get Qt/Core alone.

http://www.freertos.org/FreeRTOS-Plus/FreeRTOS_Plus_IO/FreeRTOS_Plus_IO.shtml

 

 

vitorian.com --- We do this for fun. Always give kudos. Accept as solution if your question was answered.
I will not answer to personal messages - use the forums instead.
0 Kudos
Adventurer
Adventurer
3,274 Views
Registered: ‎05-01-2017

Re: QT or other GUI application on FreeRTOS

Jump to solution

Hi Henry Bucher,

 

Thanks for the quick reply.

 

It seems quite complicated to port QT. Is there any alternative GUI to work with freeRTOS with less "tinkering"?

 

Please advise, thanks in advance.

 

Mike

0 Kudos
Scholar hbucher
Scholar
4,891 Views
Registered: ‎03-22-2016

Re: QT or other GUI application on FreeRTOS

Jump to solution

@exds75

 

https://github.com/ryankurte/micro-gui

 

EasyGUI (www.easygui.com) but it is not open source and not free.

 

 uGFX https://ugfx.io/ also commercial.

 

I have never used any of these btw

 

 

 

vitorian.com --- We do this for fun. Always give kudos. Accept as solution if your question was answered.
I will not answer to personal messages - use the forums instead.
0 Kudos
Adventurer
Adventurer
3,258 Views
Registered: ‎05-01-2017

Re: QT or other GUI application on FreeRTOS

Jump to solution
thank you for the advices.