UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Explorer
Explorer
4,064 Views
Registered: ‎06-25-2008

SDK Is Not Generating Drivers

SDK is not generating my xiic drivers now when it did before I updated to 13.4.  I noticed that the MSS had the iic cores driver version blank and there is no generated .c .h files.  Does anyone know why this happens? 

0 Kudos
4 Replies
Moderator
Moderator
4,063 Views
Registered: ‎09-12-2007

Re: SDK Is Not Generating Drivers

in bsp (board support package ) settings can you add the driver here? To get this in Xilinx Tools -> board support package settings. Change this from generic to iic driver.

 

If this is not here, can you make sure that the hardware is connected correctly in EDK, bus, ports, address space, ect. The libgen used the XML file to comile the drivers. The XML file is created when exported from wdk to sdk uisng the MHS file.

0 Kudos
Highlighted
Explorer
Explorer
4,057 Views
Registered: ‎06-25-2008

Re: SDK Is Not Generating Drivers

Thanks for the reply.  Before the upgrade to 13.4 the files were being generated so any idea what could have happened?

0 Kudos
Moderator
Moderator
4,048 Views
Registered: ‎09-12-2007

Re: SDK Is Not Generating Drivers

ust some background into the SDK. When, exporting ffrom XPS to SDK, A tool call psf2edward runs. This will take the MHS file, and create an XML file. This XML file is used in Libgen, which will compile your drivers, ect..

 

So, if the MHS is not correct, the XML will not be correct, ect.. so this is worth checking. Also, have you checked the BSP setting t omake sure that you can select the iic driver?

0 Kudos
Explorer
Explorer
4,046 Views
Registered: ‎06-25-2008

Re: SDK Is Not Generating Drivers

I think EDK/SDK screwed itself up with the uprgade from 13.1 - 13.4 since nothing was making sense.  I started a new project with the exact same MHS file and now it is working fine (with the exception that SDK won't load the FPGA but EDK will).

0 Kudos