UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Observer timelmg
Observer
7,334 Views
Registered: ‎07-18-2011

SDK does not detect Platform USB Cable 2

I have connected my Zynq based board to my JTAG pod, opened SDK 2015.1 and tried to connect but it did not detect it.

 

- The hw_server used was localhost:3121 (the default). 

- The green light is on on the JTAG pod

- I have tried two different pods with no luck

-  iMpact with the same pod detects the Zynq onboard

 

This is the first time I have used SDK 2015.1 (I have used SDK 14.7 in the past) so I am unfamiliar with the server based approach to setting up JTAG.  

 

Can anyone help? 

 

Thanks,

 

Tim

0 Kudos
1 Reply
Observer timelmg
Observer
7,332 Views
Registered: ‎07-18-2011

Re: SDK does not detect Platform USB Cable 2

So further investigation in the xsdb console gives:

 

connect tcp:localhost:3121
tcfchan#7
xsdb% jtag targets
  1* whole scan chain
     2  ARM_DAP (idcode 4ba00477 irlen 4)
     3  XC7Z020 (idcode 23727093 irlen 6)
xsdb% jtag targets 3
xsdb% jtag targets
  1  whole scan chain
     2  ARM_DAP (idcode 4ba00477 irlen 4)
     3* XC7Z020 (idcode 23727093 irlen 6)
xsdb% jtag targets 1
xsdb% jtag targets
  1* whole scan chain
     2  ARM_DAP (idcode 4ba00477 irlen 4)
     3  XC7Z020 (idcode 23727093 irlen 6)
xsdb% jtag targets 0
no target(s) with id: 0
xsdb% jtag targets
  1* whole scan chain
     2  ARM_DAP (idcode 4ba00477 irlen 4)
     3  XC7Z020 (idcode 23727093 irlen 6)
xsdb%

 

However it still won't discover them through the program FPGA dialog and thus programming won't work.

 

Tim

0 Kudos