04-20-2019 11:46 AM
I've met a SDK bug about MIPI CSI2RX Subsystem IP, in a Vivado IPI Project for the reVision reference design.
(1) When the MIPI CSI2RX Subsystem IP's pixel format is configured with YUV422_8bit, and after SDK of this Vivado project is lanuched:
When launching pmufw/zynqmp_fsbl project, SDK will operates normally;
(2) When the MIPI CSI2RX Subsystem IP's pixel format is configured with RAW12, and after SDK of this Vivado project is lanuched:
When launching pmufw/zynqmp_fsbl project, SDK will report an error :
----------------SDK GUI shows the fowllowing infomation--------------
Project cannot be created
Error generating bsp sources. please check the sdk log view for futher details.
----------------Related SDK.log shows the fowllowing infomation--------------
00:17:08 ERROR : (XSDB Server)ERROR: [Hsi 55-1562] Source directory $device-tree-xlnx-xilinx-v2018.2/axi_gpio/src does not exist or is not a directory.
00:17:09 ERROR : Error generating bsp sources: Failed in generating sources
The attachments are related block design's tcl and iprepo, pre-generated .hdf and .bit to reproduce the above error.
05-02-2019 05:05 AM
Hi @vollerain ,
Could you elaborate a little bit the issue? I'm not sure if I am understanding it properly. You mention the error gets launching pmufw/zynqmp_fsbl project but then the error log prompts to an issues in the project generation... Do you mean that you cannot create FSBL or PMUFW project with the second use case HDF file?
05-03-2019 07:06 PM
Yes, I just mean what you described
05-12-2019 11:28 PM
Hi @vollerain ,
Launching a debug or run configuration sometimes might trigger a project build under the hood when automatic build is enabled in your workspace. Can you disable the feature and launch the debug session?
Anyway there is something wrong in one of your projects (seems to be related to device-tree kind of project?), so test buildling your projects on the C prespective to ensure you don't have any issue there.
05-13-2019 07:36 AM
I was able to build the fsbl, and pmufw using the HDF you provided without issue. Can you clarify what steps you are taking here?