UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Explorer
Explorer
2,917 Views
Registered: ‎12-06-2007

Simple Uart Interrupt Mode Problem (Please Help)

Good evening,

 

     Previously the uart was created in a polling mode (Original\ML401\TestApp_Peripheral\src\Code_Header\xuartlite_send_or_recv.c), which only receive 16 bytes of data.

     I need to receive more than 16 bytes so I did an Interrupt mode Uart (Modified\ML401\TestApp_Peripheral\src\Code_Header\xuartlite_send_or_recv.c). I followed some examples (References\....).

    Because I am not familiar with interrupt , I need someone to check my coding flow of  the UART (xuartlite_send_or_recv.c). I fear I missed out anything.

   Did I miss out anything?

 

    Please reply to me as soon as possible. 

 

Thank you

0 Kudos
2 Replies
Explorer
Explorer
2,916 Views
Registered: ‎12-06-2007

Re: Simple Uart Interrupt Mode Problem (Please Help)

This the orginal folder is inside the attachment
0 Kudos
Explorer
Explorer
2,915 Views
Registered: ‎12-06-2007

Re: Simple Uart Interrupt Mode Problem (Please Help)

This is the references
0 Kudos