UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor andrewcapon
Visitor
1,715 Views
Registered: ‎09-15-2014

Simulating MicroBlaze MCS

Hi Guys,

 

I am having trouble simulating MicroBlaze MCS.

 

I am using WebPack ISE 14.7

 

I have followed the steps outlined here: http://forums.xilinx.com/xlnx/attachments/xlnx/EDK/30029/1/mcs_sim.pdf

 

When I add the bram.mem files to the project I cannot set the association to Simulation, only to None or Implementation.

 

Weh I run the simulation a can see the Trace_PS signal changing and the Trace_Date_Byte_Enable changes to 1111 but no other signals change.

 

My guess is that ISim is not loading the bram files, has anyone any pointers to what I should check.

 

Many thanks

 

Andy

0 Kudos
1 Reply
Moderator
Moderator
1,704 Views
Registered: ‎04-17-2011

Re: Simulating MicroBlaze MCS

Moving to correct board.
Regards,
Debraj
----------------------------------------------------------------------------------------------
Kindly note- Please mark the Answer as "Accept as solution" if information provided is helpful.

Give Kudos to a post which you think is helpful and reply oriented.
----------------------------------------------------------------------------------------------
0 Kudos