cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
saranshmeh
Adventurer
Adventurer
2,880 Views
Registered: ‎04-09-2010

TestApp_memory with DDR2

Hi all,

 

I am running TestApp_memory application for testing my DDR2. When I put the bit file, i do not receive the whole test result on the hyperterminal. Only -

 

"-- Entering main() --
Starting MemoryTest for DDR2_SDRAM_W1D32M72R8A_5A:
  Running 32-bit test...

"

 

is diplayed.Without any conclusion on test passed or failed. I am not getting why is the whole test not running. It should atleast give some result - passed/failed. Why is it hanging in between?

 

Does anyone has any idea of this problem?

 

Thanks in advance

Saransh

0 Kudos
2 Replies
prateek_bhatt
Scholar
Scholar
2,860 Views
Registered: ‎08-21-2008

Which memory are you using to run the test_app application...

If you run from DDR and test DDR simultaneously it will hang...

Also at what baud you are running...

Best of luck.
--
Unlimited in my Limits.
0 Kudos
saranshmeh
Adventurer
Adventurer
2,820 Views
Registered: ‎04-09-2010

hi,

 

I checked. Program is running from local memory only.

Also i checked with both 9600 and 115200 baud rates, but the results were the same.

 

regards

saransh

0 Kudos