cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
michielk
Newbie
Newbie
443 Views
Registered: ‎04-13-2021

Vitis 2020.2 Error initializing SD boot data

I'm trying to build a very basic project in Vitis for the ZCU102 board. In this case, just using the standard zcu102 xsa file for the board and the "Hello World" application project example template. This, and other simple projects, building a bitstream in Vivado invariably fail in Vitis on the error below. The zcu102 board files are installed in Vivado and Vitis ... any suggestion what might be the problem here?

michielk_0-1618323447911.png

 

0 Kudos
1 Reply
longley
Xilinx Employee
Xilinx Employee
319 Views
Registered: ‎04-15-2011

I don't see this error before. But if you are using the xsa files that are installed in Vitis installation, I think there might be something wrong with your building steps.

Please follow steps in Chapter3 of UG1209 to create a platform and build a helloworld to see if it still has the same issue. 

Thanks,

Longley


------------------------------------------------------------------------------------------------

Don’t forget to reply, kudo, and accept as solution.

If starting with Versal take a look at our Versal Design Process Hub and our
Versal Blogs

------------------------------------------------------------------------------------------------
0 Kudos