UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Observer shikhar623
Observer
3,494 Views
Registered: ‎03-24-2011

Want to add an new IP core/ HARDWARE INTERFACE to the XPS project.

I am using a custom board, which includes XILINX fpga(xc4vfx100).
i am accessing the FLASH memory(s29jl064h), using XPS for reading/writing data of the look up table during the execution of that code in Power PC.
so, finally want to create new IP core, which will access the flash, when i make a new hardware in HARDWARE>>CREATE or IMPORT PERIPHERAL.
In a new window, XPS asks for some series of information regarding our custom peripheral, please help me in filling  the requied inforamtion. i am attaching the datasheet of the flash memory.
the image below shows the screenshot of the FLASH1_0 IP core i want to generate.


thank U
scnshot8.PNG
0 Kudos
1 Reply
Highlighted
Observer shikhar623
Observer
3,491 Views
Registered: ‎03-24-2011

Re: Want to add an new IP core/ HARDWARE INTERFACE to the XPS project.

the DATASHEET of the flash memory .

0 Kudos