cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
chupenghui
Observer
Observer
3,153 Views
Registered: ‎04-08-2010

how can i deal with this XST problem?

ERROR:NgdBuild:604 - logical block
   'chipscope_ila_0/chipscope_ila_0/i_chipscope_ila_0' with type
   'chipscope_ila_0' could not be resolved. A pin name misspelling can cause
   this, a missing edif or ngc file, or the misspelling of a type name. Symbol
   'chipscope_ila_0' is not supported in target 'spartan3a'.
0 Kudos
3 Replies
pavithra
Adventurer
Adventurer
3,142 Views
Registered: ‎10-25-2009

hi

may be i  version of chipscope is not matching.

can u tell  procedure  how u created chipscope.

0 Kudos
chupenghui
Observer
Observer
3,138 Views
Registered: ‎04-08-2010

IP core adding steps:

1. Adding a Chipscope Integrated Controller and a Chipscope Integrated Logic Analyzer(ILA) into the microblaze in the IP Catalog tag

2.in the System Assembly View/Port tag , i  give  the  control0  of  the chipscope_icon_0  core  a  new   connection : chipscope_icon_0_control0;

at  the  same  time  ,i give the  ports of  the  ILA   core  the  following  connection:

                                                                                TRIG_OUT                              No Connection

                                                                                 TRIG0                                   cam32x16_0_match_addr

                                                                                  DATA                                     No Connection                      

                                                                                   CLK                                         sys_clks

                                                                          CHIPSCOPE_ILA_CONTROL     chipscope_icon_0_control0    

the signal :   cam32x16_0_match_addr   is  what  i  want  to  watch  by  the  chipscope,

 

 After  the  steps above  i  try to  generate the  bitstream , then came the error:

ERROR:NgdBuild:604 - logical block
   'chipscope_icon_0/chipscope_icon_0/i_chipscope_icon_0' with type
   'chipscope_icon_0' could not be resolved. A pin name misspelling can cause
   this, a missing edif or ngc file, or the misspelling of a type name. Symbol
   'chipscope_icon_0' is not supported in target 'spartan3a'.
ERROR:NgdBuild:604 - logical block
   'chipscope_ila_0/chipscope_ila_0/i_chipscope_ila_0' with type
   'chipscope_ila_0' could not be resolved. A pin name misspelling can cause
   this, a missing edif or ngc file, or the misspelling of a type name. Symbol
   'chipscope_ila_0' is not supported in target 'spartan3a'.

0 Kudos
xiaofeip_dup
Xilinx Employee
Xilinx Employee
3,104 Views
Registered: ‎08-07-2007

Try the Debug Wizard from the XPS GUI.

 

-Felix

0 Kudos