cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
ss_tech
Contributor
Contributor
3,703 Views
Registered: ‎01-13-2012

how using spi flash

Jump to solution

how using spi flash in edk program with programming amplifier and AD?

thank you  .............

0 Kudos
1 Solution

Accepted Solutions
ss_tech
Contributor
Contributor
4,682 Views
Registered: ‎01-13-2012

thank you for help.............

Iam needed programming amplifer and ADC by using spi drivers and how know sck of spi

and required according to spi data sheet that found in edk as follow:

SPI master device with or without FIFOs where the slave select vector is asserted manually via
SPICR bit(24) assertion

View solution in original post

0 Kudos
3 Replies
stephenm
Xilinx Employee
Xilinx Employee
3,686 Views
Registered: ‎09-12-2007

Yes, most ADC's will have an SPI interface on them. Our spi drivers are supplied with some example applications that you can use. These are mostly targetting flash devices. However, there is a low_level application that you should be able to use

0 Kudos
ss_tech
Contributor
Contributor
4,683 Views
Registered: ‎01-13-2012

thank you for help.............

Iam needed programming amplifer and ADC by using spi drivers and how know sck of spi

and required according to spi data sheet that found in edk as follow:

SPI master device with or without FIFOs where the slave select vector is asserted manually via
SPICR bit(24) assertion

View solution in original post

0 Kudos
ss_tech
Contributor
Contributor
3,664 Views
Registered: ‎01-13-2012
iam needed programming amplifer and ADC by using spi drivers and how know sck of spi

and required according to spi data sheet that found in edk as follow:

SPI master device with or without FIFOs where the slave select vector is asserted manually via
SPICR bit(24) assertion
thank............................
0 Kudos