UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor tronix
Visitor
4,205 Views
Registered: ‎11-11-2009

problem taking input from hyperterminal-help!!!

i am using EDK 10.1 and Spartan 3E

i had written a very basic code to take two integers from the user and display the sum. the code looks something like this

 

 

 

#include "stdio.h"

 

int main(void)

{

 

         int a,b,c;

         xil_printf("enter the first no:");

         scanf("%d",&a);

         xil_printf("enter the second no:");

         scanf("%d",&b);

        c=a+b;

         xil_printf("result is %d",c);

        return(0)

}

 

 

the hyperterminal receives the first no. but does not accept the second no and the result displayed is a garbage no.

I dont  know what the problem is.pls help

 

 

 

 

0 Kudos
4 Replies
4,198 Views
Registered: ‎08-21-2008

Re: problem taking input from hyperterminal-help!!!

Hello.

Try this code and also compare your code with this.

Note:Do check your base address for UART controller. 

*********************************************************

#include "xuartlite_l.h"
#include "xio.h"

main()
{
Xuint8 data1,data2,sum;

xil_printf("\n\rEntering MAIN\n\r");
while(1)
{
data1 = XUartLite_RecvByte (baseaddr);
data2 = XUartLite_RecvByte (baseaddr);

sum = data1+data2
xil_printf("\nSUM=0x%x", sum);
}
}
Best of luck.
--
Unlimited in my Limits.
0 Kudos
Highlighted
Visitor tronix
Visitor
4,126 Views
Registered: ‎11-11-2009

Re: problem taking input from hyperterminal-help!!!

Hey

Thanks alot tat code worked out for us .

I have one more doubt for - are pointers acceptable in sdk? We are workin on Hauffman codec for which we need to creat trees and so we need pointers. Can u pls throw some light on this problem.

Thank you. 

0 Kudos
4,123 Views
Registered: ‎08-21-2008

Re: problem taking input from hyperterminal-help!!!

Hello.

As far as pointers are concerned its a feature of C language.

SDK supports C so i don't think there is any point for unacceptance of pointers in SDK.

Pointers are not tool dependent.

Although i haven't used SDK much but its logical.

Message Edited by prateek_bhatt on 11-21-2009 12:55 AM
Best of luck.
--
Unlimited in my Limits.
0 Kudos
Visitor stone9502
Visitor
4,112 Views
Registered: ‎07-31-2009

Re: problem taking input from hyperterminal-help!!!

Pointer can be used for sure, I am using it. Please note that once you use malloc() function or c++ new operation, be sure that the heap size is set correctly in the linker script so that you can manage the memory.

 

 

0 Kudos