UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Visitor gs_medinok
Visitor
165 Views
Registered: ‎04-14-2016

sdk hangs on debug system

Jump to solution

sometimes Vivado SDK hangs when I want to debug: launching system debugger, executing 'psu_init'  stops at  (99%) completion and do nothing anymore.

Is there a solution to this problem?

PSU_INIT.jpg
0 Kudos
1 Solution

Accepted Solutions
Highlighted
Visitor gs_medinok
Visitor
123 Views
Registered: ‎04-14-2016

Re: sdk hangs on debug system

Jump to solution

I realized with the following procedure the problem is solved:

- Close SDK tool

- Switch off the board!

- Re-open SDK and wait for initializations

- Switch on the board

- Load bitstream and run debug

2 Replies
Highlighted
Visitor gs_medinok
Visitor
124 Views
Registered: ‎04-14-2016

Re: sdk hangs on debug system

Jump to solution

I realized with the following procedure the problem is solved:

- Close SDK tool

- Switch off the board!

- Re-open SDK and wait for initializations

- Switch on the board

- Load bitstream and run debug

Moderator
Moderator
89 Views
Registered: ‎03-25-2019

Re: sdk hangs on debug system

Jump to solution

Hi @gs_medinok,

It seems that you are not setting the “Reset entire system” option from your Debug Configuration (main_menu> Run> Debug Configurations…):

reset.png

This option, will reset the target system before executing the psu_init.tcl script.
Not resetting the target may lead to such failures.

Best regards,
Abdallah
-------------------------------------------------------------------------------
Please don't forget to reply, kudo and accept as a solution
0 Kudos