cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
cpandya90
Observer
Observer
2,838 Views
Registered: ‎05-12-2017

xparamters.h file doesn't show address map of BRAM

Jump to solution

Hi all,

 

I am working on project that will do data transfer from Block RAM to DDR memory through CDMA block.

In this I am doing two transfer process.

(1) from bram to ddr using processor

(2) from bram to ddr using cdma block.

 

For these processes I am using two separate block ram (1)bram0 for transfer using processor and (2)bram1 for transfer using CDMA block.

 

Here I have attached my xparamters.h file and block diagram of my project design.

 

In xparameters.h file, it only shows mapping of bram0 but doesn't show mapping of bram1.

 

Can anybody help me out.

 

Thank you.

 

Tags (4)
block_design.PNG
address_mapping.PNG
0 Kudos
1 Solution

Accepted Solutions
stephenm
Xilinx Employee
Xilinx Employee
4,859 Views
Registered: ‎09-12-2007

Only the address map for the processor will be shown in the xparameters.h.

 You can just manually define this in your application

View solution in original post

0 Kudos
1 Reply
stephenm
Xilinx Employee
Xilinx Employee
4,860 Views
Registered: ‎09-12-2007

Only the address map for the processor will be shown in the xparameters.h.

 You can just manually define this in your application

View solution in original post

0 Kudos