UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Visitor asayans001
Visitor
5,157 Views
Registered: ‎05-08-2014

xps dont open datasheet

Jump to solution

Hello,

 

I have Xilinx ISE design suite 12.3 and allready installed 13.4 . I have this problem in earlier version and it allready persist. when i whant to se and IP core datasheet, i go to that IP righ click on int and select "View PDF datasheet", but nothing happens.

 

Someone has this problem? or know hot to solve it?

 

thank you in advantege.

 

0 Kudos
1 Solution

Accepted Solutions
Xilinx Employee
Xilinx Employee
8,939 Views
Registered: ‎06-14-2012

Re: xps dont open datasheet

Jump to solution

Yes there was a known issue which was fixed in latest versions. 

All data sheets for IP available in an ISE installation can be found at: $XILINX/ip/xilinx

In this location, you will find folders for categories of IP.  For example, if you are looking for the PDF for the MAC FIR core, go to the following path:
 $XILINX/coregen/ip/xilinx/dsp/com/xilinx/ip/mac_fir_v5_0
 
Hope this helps.

 

 

Regards

Sikta

0 Kudos
2 Replies
Xilinx Employee
Xilinx Employee
8,940 Views
Registered: ‎06-14-2012

Re: xps dont open datasheet

Jump to solution

Yes there was a known issue which was fixed in latest versions. 

All data sheets for IP available in an ISE installation can be found at: $XILINX/ip/xilinx

In this location, you will find folders for categories of IP.  For example, if you are looking for the PDF for the MAC FIR core, go to the following path:
 $XILINX/coregen/ip/xilinx/dsp/com/xilinx/ip/mac_fir_v5_0
 
Hope this helps.

 

 

Regards

Sikta

0 Kudos
Visitor asayans001
Visitor
5,108 Views
Registered: ‎05-08-2014

Re: xps dont open datasheet

Jump to solution

Thank you, is not the specific places i have at

$XILINX/EDK/hw/XilinxProcessorIPLib/pcores/*****/doc

 

but your answer has been so usefull.

0 Kudos