UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

cancel
Showing results for 
Search instead for 
Did you mean: 
Observer timing@idt
Observer
170 Views
Registered: ‎06-07-2018

AXI DMA stopped working after 7 hours of operation in xapp1305 + 1588

Hi 

I have a custom design based on Xilinx xapp1305 reference design, where I added a 1588 timer and enabled the 1588 feature from the AXI 1G/2.5G Ethernet subsystem

 

It is all working fine until after around 7 hours of operation, when internet stopped working and the ifconfig shows the overrruns happened on the RX path. I dumpped /proc/interrupts and found that the rx_irq of the AXI DMA for the AXI Ethernet subsystem stopped happening. 

 

I am wondering if anyone has the similar experience. So far I have no clue why this is happening. On the other hand, the original xapp1305 doesn't have this problem.

 

Thanks

0 Kudos
1 Reply
Highlighted
Scholar mrbietola
Scholar
117 Views
Registered: ‎05-31-2012

Re: AXI DMA stopped working after 7 hours of operation in xapp1305 + 1588

don't know if it's related by i used VDMA and often they stopped working. 

I since then included in my programs a check to continuosly check if they are running and just in case re-start them

0 Kudos