cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
250 Views
Registered: ‎12-04-2019

I am trying to create boot image after performing the steps in the following documentation

https://www.xilinx.com/html_docs/xilinx2019_2/vitis_doc/Chunk375818786.html#hog1570652702356

while I build it shows a warning

WARNING: [fsbl_config] a53_x64 | a53_x32 | r5_single | r5_dual is no more supported. Use 'destination_cpu' attribute for bootloader partition

Is this of any concern?

ZCU102 is stuck after FSBL and ATF . The control is not transferred to U-boot

I have attached the bif file below

//arch = zynqmp; split = false; format = BIN
the_ROM_image:
{       
	[fsbl_config] a53_x64
        [bootloader]zynqmp_fsbl.elf
	[pmufw_image]pmufw.elf
	[destination_device = pl]zcu102_min.bit
	[destination_cpu = a53-0, exception_level =el-3, trustzone]bl31.elf
	[destination_cpu = a53-0, exception_level =el-2]u-boot.elf
}

All files mentioned are in the same directory

0 Kudos
1 Solution

Accepted Solutions
Highlighted
Moderator
Moderator
222 Views
Registered: ‎12-04-2016

Re: Bootgen

Jump to solution

Hi gokulakrishnan.ra@htic.iitm.ac.in 

Just change the BIF file like this and try generating BOOT.bin

the_ROM_image:
{       
	[fsbl_config] a53_x64
        [bootloader, destination_cpu=a53-0]zynqmp_fsbl.elf
	[pmufw_image]pmufw.elf
	[destination_device = pl]zcu102_min.bit
	[destination_cpu = a53-0, exception_level =el-3, trustzone]bl31.elf
	[destination_cpu = a53-0, exception_level =el-2]u-boot.elf
}

 

 

Best Regards

Shabbir 

View solution in original post

0 Kudos
2 Replies
Highlighted
Moderator
Moderator
223 Views
Registered: ‎12-04-2016

Re: Bootgen

Jump to solution

Hi gokulakrishnan.ra@htic.iitm.ac.in 

Just change the BIF file like this and try generating BOOT.bin

the_ROM_image:
{       
	[fsbl_config] a53_x64
        [bootloader, destination_cpu=a53-0]zynqmp_fsbl.elf
	[pmufw_image]pmufw.elf
	[destination_device = pl]zcu102_min.bit
	[destination_cpu = a53-0, exception_level =el-3, trustzone]bl31.elf
	[destination_cpu = a53-0, exception_level =el-2]u-boot.elf
}

 

 

Best Regards

Shabbir 

View solution in original post

0 Kudos
138 Views
Registered: ‎12-04-2019

Re: Bootgen

Jump to solution

I changed the bif file and also built the petalinux again

that solved the issue

0 Kudos