cancel
Showing results for 
Search instead for 
Did you mean: 
207 Views
Registered: ‎09-18-2019

Booting from an SD card and running linux application

I am trying to run a Linux application on a ZC706 eval board and I cannot connect to a computer with the SDK on it (I only have access to the SDK via a virtual machine).  As such I have to boot off of an SD card.  How do I go about putting my application on the eval board and running it if I can only use the SD card?

0 Kudos
1 Reply
Highlighted
Xilinx Employee
Xilinx Employee
182 Views
Registered: ‎07-11-2019

Re: Booting from an SD card and running linux application

Hello @stephen.lindeman 

I have linked you to a forum post that will help in booting form an SD card. I have also attached UG1209 which will go more in depth on how to do this.

Forum: https://forums.xilinx.com/t5/ACAP-and-SoC-Boot-and/Zynq-booting-from-SD-Card/td-p/470062

UG1209: https://www.xilinx.com/support/documentation/sw_manuals/xilinx2019_1/ug1209-embedded-design-tutorial.pdf

I hope this helps!

-------------------------------------------------------------------------------------------------
Don’t forget to reply, kudo, and accept as solution.
-------------------------------------------------------------------------------------------------